Features

Standard Features

Structural

  • 7' 6" Tall, 6' 9" Wide
  • Galvanized Structural Tubing in Walls and Floor (No Black Steel)
  • One-Piece Aluminum Roof
  • 8-Year Structural Warranty and 2-Year Hitch-to-Bumper Warranty

Exterior

  • Smooth Aluminum Skin .050 Lower Wall Panel(Attached with 3M VHB Bonding System) with Legacy Horse Graphic (Choice of White, Silver, Champagne or Black) - XT Model
  • Exterior Aluminum Slats Lower Wall Panel (.100 Heavy Extruded Mill Finished) Full Length of Side Walls - XTR Model
  • Vortex Rubber Coating on Tongue
  • Treadbrite Gravel Guard (Bumper Pull)
  • Extruded Aluminum Ribbed Running Boards and Aluminum Fenders
  • Graphics (As Shown)
  • Exterior Tie Rings (One On Each Side)

Wheels And Axles

  • Torsion Axles
  • Radial Tires with Radial Spare Tire
  • Aluminum Wheels

Electrical

  • Three Flood Lights Controlled by Outside Light Switch
  • Dome Lights with Remote Switch in Tack Room and Stall Area
  • L.E.D. Marker and Tail Lights

Tack/Dressing Room

  • Single-Wall Construction
  • Removable Carpet on Floor
  • Stationary Saddle Rack
  • 4-Place Blanket Bar
  • Door Organizer
  • Shavings Fork
  • Grab Handle by Tack Room Door
  • Picture Window Shortwall (GN Models) • Boot Box
  • 12 Additional Bridle Hooks (24 Total)
  • Completely Carpeted Angle Wall
  • Two Hat Racks
  • Square Corner Water Tank

Stall Area

  • Triple-Wall Construction 52" High with Vortex Rubber Coating
  • 129” Stall Length
  • Whiz Proof Aluminum Floor with SureGrip
  • Large Sliding Window Per Stall with Window Bars
  • Aluminum 3-Piece Rear Doors (Wrap Around Tail Curtains & Spring Loaded Ramp)
  • Escape Door at Front of Stall (Each Side) with Drop Down Window and Grill
  • Padded Aluminum Divider
  • Padded Chest and Butt Bar (Each Stall)
  • Hock Deflector Pad and Head Bump Pad
  • Pop-Up Vent (One Per Stall)
  • Interior Tie Ring (One Per Stall)
  • Panel and Insulated Stall Ceiling
  • EZ Tie Strap - One Per Stall
  • Feed Bag Per Stall
  • Feed Bag Hooks (One Per Stall)
  • Removable Center Post & Divider
  • Insulated Panel and Roof (Includes Stall Area and Dressing Room Area)

Optional Features

Structural/Exterior

  • Aluminum .050 Corrugated Mill Finish Lower Panel of Stall Area
  • Aluminum Hay Rack and Ladder
  • Legacy Graphics
  • 7'3" Wide or 8' Wide
  • Living Quarter Package Available

Wheels And Axles

  • Axle and/or Tire Upgrades
  • Aluminum Wheels
  • Disc Brakes (Includes Actuator)

Electrical

  • Extra Flood Lights, Dome Lights
  • Battery Package

Tack/Dressing Room

  • Dual Man Door

Stall Area

  • Aluminum Full Rectangular Jail Bar Divider
  • Jail Bars in Sloping Shoulder Divider
  • Aluminum Stud Divider Panel (Removable Lower Divider)
  • Extra Exterior Tie Rings
  • Camper Vent or 12-Volt Fantastic Vent 

2+1 Aluminum Warmblood GN

Structural

  • 7' 6" Tall, 6' 9" Wide
  • Galvanized Structural Tubing in Walls and Floor (No Black Steel)
  • Extruded .100 Aluminum or Corrugated .050 Aluminum on Lower Half of Exterior Walls
  • One-Piece Aluminum Roof
  • 8-Year Structural Warranty and 2-Year Hitch-to-Bumper Warranty

Exterior

  • Aluminum .050 Side Sheets (Attached with 3M VHB Bonding System)
  • Vortex Rubber Coating under Gooseneck
  • Extruded Aluminum Ribbed Running Boards and Brushed Aluminum Fenders
  • Warmblood Graphics
  • Extended Sides
  • Aluminum Wheels
  • Stainless Nose 

Wheels And Axles

  • Radial Tires with Radial Spare Tire
  • Steel Wheels with Center Cap
  • Torsion Axles

Electrical

  • Three Flood Lights Controlled by Outside Light Switch
  • Dome Lights with Remote Switch in Tack Room and Stall Area
  • L.E.D. Marker and Tail Lights

Tack/Dressing Room

  • Single-Wall Construction
  • Removable Carpet on Floor
  • Carpet on Top Half of Angle Wall and GN Deck
  • Stationary Saddle Rack
  • 4-Place Blanket Bar
  • Door Organizer
  • Twelve Aluminum Bridle Hooks
  • Corner Water Tank
  • 26” Short Wall or Optional Straight Wall (2+1 Model)
  • 20" x 36" GN Windows
  • Clothes Rod
  • Grab Handle
  • 24 Brindle Hooks Carpet BH Wall2 Hat Racks

Stall Area

  • Triple-Wall Construction 52” High with Vortex Rubber Coating
  • 130” Stall Length (Straight Load)
  • 38” Belly Width on Each Stall
  • Pass-Thru Door in Bulkhead Wall (2+1 Model)
  • Extra Stall/Storage Area with Side Ramp and Suicide Swing Door
  • Swinging Jail Bar Stud Doors at Front of Each Stall
  • Removable Center Poster on Dividers
  • Whiz Proof Aluminum Floor with Sure Grip
  • Large Sliding Window Per Stall with Window Bars (On Each Side)
  • Aluminum 3-Piece Rear Doors (Wrap Around Tail Curtains with Windows & Spring Loaded Ramp)(OPTIONAL: Aluminum Triple-Wall Double RearDoors with Windows and Rear Ramp)
  • Padded Aluminum Divider
  • Padded Chest and Butt Bar (Each Stall)
  • Head Bump Pad
  • Pop-Up Vent (One Per Stall)
  • Interior Tie Ring (One Per Stall)
  • Exterior Tie Rings (One on Each Side)
  • Feed Bag Hooks (Per Stall)
  • Drop Down Windows and Grills on Side Escape Doors
  • Insulated Panel and Roof EZ Tie Strap
  • Feed Bag
  • Shaving Fork